DiversiTech WS-1 Wet Switch Flood Detector

A solid state control designed to help prevent flooding, damage to carpets, walls, furniture, ceilings, etc. Now has a built-in test and reset button for easier installation. Turns system off when detecting moisture due to condensate or drain leaks. One or two drops will cause Wet Switch to turn off a unit, alerting a serviceman to a moisture problem. A lit LED indicates the Wet Switch is activated and has turned the unit off. Reset simply by drying the absorbent pad with a paper towel and pressing the reset switch. Connects to 24 VAC. More than one unit may be connected to a system. 2 amp contact rating. Simple 5 wire installation. Sales displays available.

• A high tech polymeric fiber quickly draw water into the sensor array using proven capillary technology
• Integral feet raise the hydrophilic pay and sensor array off the drain pans slightly to prevent nuisance tripping and pans corrosion (metals pans only) from interfering with the sensor array
• A high tech array of multiple stainless steel sensor detects even a minimal amounts of water drawn into the hydrophilic pay
• The technology is packed into a 3-5/8 in dia be 1-1/4 in high cylinder, furnished complete with 5-conductor 22 AWG stranded cable, 6 ft long
• Proven electronics prevent mechanical failure in an aggressive operating environment
• Allow for the wiring to interrupt the system and sound an alarm (be others) when moisture is detected
• Multiple units connectivity allow for multiple wet Switch® flood detectors to be connected in series to adequately cover large drain pans area